Spanners.JPG
7082 hits | 61.56 KB | Posted: 1/12/09
The L spanner is stronger & less likely to slip off a nut, but it won't work on a self-locking nut. Later auto hub locks use a 2-3/8" rounded hex socket.

[url=http://www.supermotors.net/registry/m...
(Posted in: Brakes & Hubs)

TSB TirePressureLoad.jpg
7064 hits | 80.44 KB | Posted: 3/4/07
TSB 89-09-16 Tire Pressure, Load, Wear

AFFECTED VEHICLES:
LIGHT TRUCK:
1984-89 ALL LIGHT TRUCK LINES

ISSUE: Tire wear can be affected by inflation and load. Good tread life is dependent on maintaining proper air pressure in the tires. Other factors...
(Posted in: TSBs & FSAs (Recalls) for '83-96 Broncos & F150s)

SteeringBoxExploded.JPG
7049 hits | 86.92 KB | Posted: 11/9/11
Steering Box

See also:
. [url=http://www.supermotors.net/registry/media/997641][img]http://www.supermotors.net/g...
(Posted in: Diagrams)

P9290044.JPG
7046 hits | 55.9 KB | Posted: 9/29/05
(Posted in: Alternator Replacement)

spool installed.jpg
7046 hits | 101.71 KB | Posted: 1/3/04
the assembled rear diff with the mini spool installed
(Posted in: Mini-Spool Install)

TSB90-02-04DRI.jpg
7035 hits | 75.92 KB | Posted: 4/20/09
TSB 90-02-04 Deposit-Resistant Injectors
TSB 93-15-07 Deposit-Resistant Injector ID Chart

Publication Date: January 17, 1990

FORD: 1990 TAURUS, TEMPO
LINCOLN-MERCURY: 1990 CONTINENTAL, SABLE, TOPAZ
LIGHT TRUCK: 1990 BRONCO, E-150, E-250, F-150, F-2...
(Posted in: TSBs & FSAs (Recalls) for '83-96 Broncos & F150s)

Regulator Out.JPG
7032 hits | 68.47 KB | Posted: 11/29/04
The regulator fits out the driver's side. On earlier Broncos, there is a brace here that must be removed. It has 1 phillips screw at the bottom. The slot for its top tab is visible in the foreground.
(Posted in: Tailgate Tech)

LkMtrs.JPG
7026 hits | 55.84 KB | Posted: 11/14/08
Lock Motor Differences
IF THE IMAGE IS TOO SMALL, click it.

The early lock motors are prone to water intrusion; both in the motor itself, and in the spiral BB mechanism, causing poor performance, high current draw, & eventual failure. They were use...
(Posted in: Doors)

4.9L_ECT.JPG
7018 hits | 85.6 KB | Posted: 4/17/11
'87-95 (MAP) 4.9L Components
TOP view; FRONT is LEFT

'95-96 MAF 4.9L ACT is in the air filter box.

See also:
[url=https://www.supermotors.net/vehicles/registry/media/894689][img]https://www.supermotors.net/getfile/894689/thumbnail/intakei6efi.jpg[/...
(Posted in: General Purpose Pics)

10Rear.JPG
7013 hits | 83.84 KB | Posted: 5/15/11
Rear case assembly
(Posted in: MultiFunction Switch)

T-caseBoltPattern.JPG
7009 hits | 21.55 KB | Posted: 7/13/08
T-case bolt pattern for all '80-96 ('97 heavy) fullsize 4WD Ford trucks. Trans output shaft is always 31-spline.
(Posted in: Diagrams)

02StrikeAlign.JPG
7008 hits | 52.35 KB | Posted: 2/9/07
The first step is to align the strike bolt so the door bends are perfectly aligned with the body bends when it's fully closed. Striker bolt torque is 24-33lb-ft (33-45Nm). This door is about 1/16" low judging by the crease below the button. I...
(Posted in: Doors)

FS 27.jpg
7007 hits | 80.92 KB | Posted: 5/3/07
(Posted in: Centurion for sale)

HeaterCore.jpg
7000 hits | 28.74 KB | Posted: 7/16/09
TSB 92-17-11 Heater Core Replacement
Publication Date: AUGUST 12, 1992

LIGHT TRUCK: 1992 BRONCO, F SUPER DUTY, F-150-350 SERIES

ISSUE: Heater core service procedures have been revised and supersede those found on page 12-03A-35 of the 1992 Light T...
(Posted in: TSBs & FSAs (Recalls) for '83-96 Broncos & F150s)

VSS 2.JPG
6972 hits | 90.41 KB | Posted: 7/10/03
This is the Cable Speed Sensor (E2AZ-9E731-A) used on early (pre-'87) cruise systems to generate a VSS. It's in the middle of the speedo cable (E3MZ-9A820-A), usually beside the brake booster, but they always seize up inside. They produce 6 pulses ...
(Posted in: General Purpose Pics)

TSB98-5A-35E-brakeCable.jpg
6972 hits | 40.2 KB | Posted: 4/18/09
TSB 98-5A-35 Rear Parking Brake Cables Bind - Vehicles Built Before 8/20/96, except chassis cab
Publication Date: MARCH 18, 1998

LIGHT TRUCK: 1992-97 F-250, F-350

ISSUE: The rear parking brake cables may bind and not allow the rear brake shoes ...
(Posted in: TSBs & FSAs (Recalls) for '83-96 Broncos & F150s)

P6250032.JPG
6969 hits | 73.84 KB | Posted: 6/26/05
(Posted in: Factory Tech Valve Body install)

P6250031.JPG
6964 hits | 77.29 KB | Posted: 6/26/05
(Posted in: Factory Tech Valve Body install)

TGcarpet.JPG
6949 hits | 49.66 KB | Posted: 10/17/10
'94-96 Bronco Tailgate Carpet

These t/g carpet pushpins have coarser fins than those for the camper trim, but are interchangeable.
Head Dia.: 19/32"
Stem Dia.: 9/32"
Stem Lgth.: 27/32"

AuVeCo #.........Color
19371 ...............Blu...
(Posted in: Tailgate Tech)

FuelTubing.JPG
6946 hits | 67.09 KB | Posted: 6/15/12
Ford has been using hard nylon fuel tubing since the early 80s - I don't know why anyone is still using rubber, but I'm through with it. Modern gasahol just tears it up, creating more work & EXPENSE than just converting before you notice any problem...
(Posted in: '90-96 Fuel Pump System)

5.8 engine swap.jpg
6943 hits | 80.42 KB | Posted: 11/15/04
the 5.8 from 95 F250
(Posted in: engine)

TGBedWeatherstrip.JPG
6937 hits | 65.55 KB | Posted: 9/29/07
Tailgate Threshhold Seal '78-96

Note that the body style shown is '78-79 (taillight & strike mounting) and the actual threshhold is NOT shown. But the seal & retainer are the same for '78-96.

The 56928-S55 screws are phillips head with large integ...
(Posted in: Tailgate Tech)

175161543sDmewU_ph.jpg
6936 hits | 47.47 KB | Posted: 3/16/05
A fine example of an intercooler removed before CCV mod,yuck!!!
Imagine what that oil coating does for air cooling efficiency,nothing at all.
(Photo author unknown)
(Posted in: CCV Modifications)

Both.jpg
6936 hits | 102.12 KB | Posted: 7/9/05
Non-PI vs. PI intake manifold.
(Posted in: PI Intake Swap)

SwingawaysExploded.JPG
6932 hits | 69.91 KB | Posted: 11/7/11
Swingaway Spare Tire Carrier Types '78-96
IF THE IMAGE IS TOO SMALL, click it.

Specific year ranges are approximate.

FOTZ-1432-A Carrier frame '80-86
F2TZ-1433-A Carrier frame '90-96 (1432)
EOTZ-1478-A Hinge, upper '80-86
EOTZ-1479-A Hinge, lower '...
(Posted in: Diagrams)

FuseBlock86.JPG
6925 hits | 72.43 KB | Posted: 10/12/10
Fuse Block for '86

See also:
http://www.revbase.com/BBBMotor/Wd
. [url=http://www.supermotors.net/registry/m...
(Posted in: Diagrams)

OilFilter49.jpg
6920 hits | 51.69 KB | Posted: 7/16/09
Also see: OASIS Broadcast - Oil Filters

TSB 95-08-08 4.9L Engine Knocking on Cold Start

AFFECTED VEHICLES:
LIGHT TRUCK:
1984-95 BRONCO, ECONOLINE, F-150-350 SE...
(Posted in: TSBs & FSAs (Recalls) for '83-96 Broncos & F150s)

Body Mount Parts.JPG
6919 hits | 80.63 KB | Posted: 7/10/03
These are the basic parts of Ford truck body mounts (cab, NOT bed). Note that the necked portion of the upper sleeve (alone at the bottom of the photo) is designed to lock onto the lower sleeve (on the R end of the bolt) to hold the rubber in place ...
(Posted in: Body Mounts)

1996 Centurion 008.jpg
6912 hits | 70.18 KB | Posted: 8/16/05
Right side
(Posted in: 1996 Pics...)

AirbagSensor.JPG
6906 hits | 71.8 KB | Posted: 10/13/10
Impact Sensor (typical)

The "sensing mass" is a large ball bearing (BB). If there's an impact strong enough to knock it loose from the magnet, it rolls forward and shorts across the contacts. Then the contacts immediately spring it back ...
(Posted in: Diagrams)

P1200021.JPG
6903 hits | 71.36 KB | Posted: 1/21/07
This install covers the passenger side leaf spring. When jacking up the passenger side, position your floor jack like I did in the above picture. If you're doing the driver's side, you can position the floor jack under the front differential.

[b]T...
(Posted in: V-Code Leaf Spring Installation)

Distributor tuning.jpg
6899 hits | 67.64 KB | Posted: 4/17/04
If your vacuum canister isn't adjustable, get one aftermarket, your mileage jump will pay for it. Better have good plug wires and gap plugs to Ford or MSD specs.
(Posted in: Vacuum dist tuning)

TSB92-19-8EngineConnector.jpg
6896 hits | 42.4 KB | Posted: 4/20/09
TSB 92-19-08 Engine Connector (C101)

Publication Date: SEPTEMBER 9, 1992

LIGHT TRUCK: 1992 BRONCO, F SUPER DUTY, F-150-350 SERIES

ISSUE: The power network box bracket has been redesigned to accommodate the 42-way connector. It is located between ...
(Posted in: TSBs & FSAs (Recalls) for '83-96 Broncos & F150s)

gta1.jpg
6893 hits | 130.38 KB | Posted: 2/5/04
my friends 1988 trans am gta...i changed the rims (note that there are no brakes haha). color from black to purple, shaved handles, tinted windows, lowered
(Posted in: photoshop)

CamberCam Side.JPG
6880 hits | 66.75 KB | Posted: 7/10/03
Factory solid Camber Cam ~'90-96 1/2-ton 4WD

I now have these to replace them:



Read the NEXT several capti...
(Posted in: Front Diff & Ball Joints)

04Tape.JPG
6876 hits | 58.01 KB | Posted: 4/5/06
The front of the hole (at the back of the channel's lip) should be no more than 26" forward from the back of the bed, but 25 is probably best. The back of the hole depends on the size of the cover plate you have, so DON'T CUT THE HOLE until you...
(Posted in: Bronco Fuel Pump Access Hole)

DCP_2689.JPG
6867 hits | 64.77 KB | Posted: 2/27/04
Here's the view through the passenger side door. You can see my piece of a shelf in the overhead hoop.

(Posted in: Roll cage)

j4temp.jpg
6846 hits | 79.93 KB | Posted: 3/18/05
Reservoir
This is a dual-function reservoir F1UZ-9B263-B from an '88 F150, but 2 ports are blocked off and only one tank is connected.

A reservoir marked "DO NOT REMOVE CUP" does not contain ...
(Posted in: '84-89 Fuel Reservoirs)

TGHarness95.jpg
6844 hits | 45.32 KB | Posted: 5/17/07
Tailgate Wiring Harness from a '95 Bronco with defrost.



The round white connector was introduced for the frame c...
(Posted in: Tailgate Tech)

3a-Remove Ball Joints-Remove Hub c-clip.mp4
6842 hits | 675.74 KB | Posted: 9/11/06
Removing the retaining/c-clip from the hub.
(Posted in: Ball Joint Replacement)

TGpins96XL.JPG
6839 hits | 53.83 KB | Posted: 12/2/09
'94-96 Tailgate w/o Carpet

Unused carpet holes plugged with pushpins, indicating all '94-96 tailgates have carpet holes.

[url=http://www.supermotors.net/registry/media/770709][img]http://www.supermotors.net/getfile/770709/thumbnail/lime96b.jpg[...
(Posted in: Tailgate Tech)

FenderBrace.JPG
6837 hits | 61.01 KB | Posted: 4/1/06
The swingaway brace inside the R quarter panel is spot-welded & riveted into place BEFORE the outer skin is welded to the inner. Removal & installation on an assembled body is nearly impossible.
(Posted in: Tailgate Tech)

LockCyl10Cut.jpg
6835 hits | 49.37 KB | Posted: 1/20/06
10-Cut Key & Lock Cylinders

See also:
. [url=https://www.supermotors.net/registry/2742/83591-4][img]http...
(Posted in: Diagrams)

P6250004.JPG
6831 hits | 65.85 KB | Posted: 6/26/05
Complete install article available at http://www.fordexcursions.com/installs/install_6/index.php.
(Posted in: Factory Tech Valve Body install)

P1200007.JPG
6827 hits | 86.83 KB | Posted: 1/21/07
SuperDuty V-Code Leaf Spring part number: 2C3Z-5310-HA
(Posted in: V-Code Leaf Spring Installation)