1984 Ford Bronco
| Owner: |
Randy Zrubek (All of this user's registries on SuperMotors) |
| From: |
Palacios, TX, U.S.A. (Other registries in TX) |
| Year, Make, & Model: |
1984 Ford Bronco (Other Ford Broncos in this club) |
| Avatar: |
 |
| Clubs: |
SuperFord.org (Other vehicles in this club)
2 Big Broncos Southern (Other vehicles in this club)
FullSizeBronco.com (Other vehicles in this club)
|
| Nickname: |
Casual Mudder |
| Mileage: |
205 |
| Engine: |
Custom "shaker" air intake assembly!!! 88 460 EFI, carb conv. w/ PME adapter, Holley 770cfm Truck Avenger, JEG's fuel system w/ 15 gal fuel cell, 140 gph electric pump, braided steel hoses & -AN fittings, HEI dizzy, Saginaw p/s pump conv. |
| Drivetrain: |
C-6,NP208F manual t-case, 88F350 Dana60 &Sterling 10.25" SAS, custom front leafspring crossmember, re-centered H1 rims, 36x12.50R16.5 GYR RT-II tires |
| Notes: |
Purchased vehicle from original owner in 8/01. New paint job 10/02 - PPG Ford medium blue metallic urethane and clear coat. S&W 10-pt roll cage kit, PRP Racing seats, RCI 5-pt harnesses, custom wiring harness, Tuffy console |
| Last Updated: |
5/31/2010 |
| Hits: |
198337 |
| Folder |
 |
 |
 |
Hits |
 |
Created |
Updated |
 whole view | 0 | 0 | 0 | 0 | 0 | 6/29/03 | 6/29/03 | | front view | 10 | 0 | 0 | 14,095 | 0 | 6/29/03 | 11/15/04 | | side view | 22 | 0 | 0 | 26,050 | 0 | 6/29/03 | 5/31/10 | | club stickers | 2 | 0 | 0 | 1,956 | 0 | 6/29/03 | 6/29/03 | | rear view | 7 | 0 | 0 | 5,818 | 0 | 6/29/03 | 11/15/04 | | Skyler softtop | 10 | 0 | 0 | 27,906 | 0 | 6/29/03 | 8/3/03 | | exhaust | 2 | 0 | 0 | 2,883 | 0 | 6/29/03 | 8/7/03 | | axle pics | 14 | 0 | 0 | 17,534 | 0 | 6/29/03 | 3/21/07 | | Interior pics | 3 | 0 | 0 | 5,674 | 1 | 3/7/05 | 3/7/05 | | SecretShakerProject | 17 | 0 | 0 | 26,972 | 0 | 6/29/03 | 4/18/06 | | S&W Racecars 10-pt cage kit | 73 | 0 | 0 | 115,905 | 0 | 3/1/05 | 9/11/06 | | PRP Racing seats | 15 | 0 | 0 | 18,121 | 0 | 3/7/05 | 9/11/06 | | Tuffy Security console | 10 | 0 | 0 | 18,409 | 0 | 3/7/05 | 5/4/05 | | 2005 FSB RITS-HS,ARK | 4 | 0 | 0 | 2,760 | 0 | 8/1/05 | 8/1/05 | | pulling motor | 15 | 0 | 0 | 11,744 | 0 | 11/3/05 | 11/28/05 | | Skyjacker Class II 6" lift | 16 | 0 | 0 | 14,312 | 0 | 11/3/05 | 5/9/07 | | driveshafts rebuild | 22 | 0 | 0 | 23,080 | 0 | 11/30/05 | 1/7/09 | | Cleaning & Rustproofing Frame | 21 | 0 | 0 | 28,438 | 0 | 1/4/06 | 9/2/06 | | axle pivot bushing tool | 8 | 0 | 0 | 72,136 | 0 | 4/25/06 | 4/25/06 | | Herculiner | 11 | 0 | 0 | 13,657 | 0 | 5/9/06 | 8/29/06 | | Long's Ranch, TX 5/27/06 | 35 | 0 | 0 | 19,694 | 0 | 8/29/06 | 10/12/06 | | Commanchee Ridge | 4 | 0 | 0 | 2,820 | 0 | 9/11/06 | 10/12/06 | | Dana60 SAS | 31 | 0 | 0 | 59,509 | 0 | 9/11/06 | 5/11/08 | | 460 Swap | 24 | 0 | 0 | 39,414 | 0 | 10/22/06 | 3/26/07 | | quick-connect door pins | 6 | 0 | 0 | 5,494 | 0 | 2/17/07 | 2/17/07 | | Hummer H1 rims | 10 | 0 | 0 | 11,074 | 0 | 5/8/07 | 3/1/10 | | Rear Shackle Flip | 8 | 0 | 0 | 11,503 | 0 | 6/11/07 | 6/11/07 | | Double-Flaring Brake Lines | 11 | 0 | 0 | 7,781 | 0 | 4/20/08 | 4/20/08 | | Dash panel | 9 | 0 | 0 | 6,720 | 0 | 4/20/08 | 10/6/08 | | FSB M&G 5-17-08 | 3 | 0 | 0 | 2,266 | 0 | 5/21/08 | 5/21/08 | | FSB M&G 11-15-08 | 4 | 0 | 0 | 2,857 | 0 | 11/17/08 | 11/17/08 | | 2009 bronco pics | 4 | 0 | 0 | 4,057 | 0 | 2/11/09 | 2/11/09 | | Brush Guard/ Winch Mount | 8 | 0 | 0 | 7,777 | 0 | 10/19/09 | 3/1/10 | | Rock Sliders | 8 | 0 | 0 | 12,105 | 0 | 3/30/10 | 4/6/10 |
 bronco-4-2006_017.jpg
11631 hits | 62.98 KB | Posted: 4/25/06
homemade tool to remove axle pivot bushings
 bronco-4-2006_032.jpg
9397 hits | 68.54 KB | Posted: 4/25/06
reverse tool to install new bushing using washer under socket, hammer used only to keep bushing straight
 bronco-4-2006_021.jpg
9387 hits | 61.4 KB | Posted: 4/25/06
Insert all-thread into bushing, place socket on side of bushing without metal lip (shown reversed in pic)
 bronco-4-2006_038.jpg
8598 hits | 67.05 KB | Posted: 4/25/06
bushing will "pop" loose
 bronco-4-2006_033.jpg
8573 hits | 64.73 KB | Posted: 4/25/06
place collar on other side, then plate and attach nuts&washers
 bronco-4-2006_018.jpg
8425 hits | 63.51 KB | Posted: 4/25/06
12" length of 1/2" all-thread, 2.5" I.D. x0.25" thick pipe collar, 1/2" thick metal plate, 13/16" impact socket, nuts and large washers
 bronco-4-2006_037.jpg
8309 hits | 66.85 KB | Posted: 4/25/06
give a sharp blow with hammer, re-tighten nuts if needed
 bronco-4-2006_029.jpg
7822 hits | 61.57 KB | Posted: 4/25/06
tighten nuts on both sides until they stop (100-120 ft.lbs.)
 digibronco12.jpg
6132 hits | 27.96 KB | Posted: 6/29/03
Skyler "fastback" softtop
Maintenance & Modification Logs
| Date | Type | Mileage | Title / Description | $ Amount | | 05/10/04 | Modification | 205000 | S&W Race Cars cage kit
Purchase of S&W Race Cars 10-point cage kit, part # 11-3560 | 339.66 | | 06/05/02 | Repair | 180000 | Driveshaft/battery cable
B&B Muffler Shop replaced rear driveshaft u-joints and battery cables | 339.19 | | 01/17/02 | Repair | 173193 | New exhaust system
B&B Muffler Shop installed new cat and Flowmaster muffler w/ dual exits. | 565.89 | | Total | 1,244.74 |
|
|
