tank1.JPG 1976 hits | 39.78 KB | Posted: 4/12/04 Before Shot.. Raised the carpet (later i cut it out..)
tank2.JPG 2135 hits | 45.13 KB | Posted: 4/12/04 Cut the hole. Front to back i cut between the braces on the frame. Side to side i cut the width of t...
tank3.JPG 1914 hits | 46.03 KB | Posted: 4/12/04 Test fit the tank to see what you need to trim. I had to remove about 1/4" from the lip of the rear ...
tank6.JPG 1640 hits | 45.41 KB | Posted: 4/12/04 So much clearance now.. (I redid the exhaust later)
tank7.JPG 1811 hits | 43.62 KB | Posted: 4/12/04 Started the cover.. I made it a bit high but it wasnt a big deal for me.
tank8.JPG 1703 hits | 40.8 KB | Posted: 4/12/04 Has 2 access areas.. One for the the fuel hose and one for the fuel pump.
tank9.JPG 1642 hits | 40.44 KB | Posted: 4/12/04 Covers will be bolted on. Easy to remove
tank10.JPG 1616 hits | 44.38 KB | Posted: 4/12/04 Access to the fuel pump.. Lots of room to remove it without dropping the tank.
tank11.JPG 1780 hits | 45.77 KB | Posted: 4/12/04 box completed.. welding it on.
tank12.JPG 1639 hits | 42.81 KB | Posted: 4/12/04 Bought this recessed fuel filler from an online race shop.
tank13.JPG 2010 hits | 48.46 KB | Posted: 4/12/04 Used a 4-1/4" diameter hole saw to cut into the side for the recessed fuel filler
tank14.JPG 1629 hits | 39.17 KB | Posted: 4/12/04 Had to go through 2 layers.
tank15.JPG 1764 hits | 47.54 KB | Posted: 4/12/04 bolted on with supplied G8 bolts and nuts. You will lose some skin bolting this thing up..
tank16.JPG 1883 hits | 47.64 KB | Posted: 4/12/04 It came up that the California Smog places would check for proper fuel filler so i decided to use th...
tank17.JPG 1825 hits | 30.97 KB | Posted: 4/12/04 used another holesaw to remove the filler neck and slipped on the stock bronco filler. used 3 self t...
tank18.JPG 1732 hits | 48.66 KB | Posted: 4/12/04 view from the back. The fuel goes through the black hose into the tank and the air and fumes escape ...
tank19.JPG 1716 hits | 54.77 KB | Posted: 4/12/04 Used some rubber straps to hold the tank down and some rubber under the tank to seperate it from the...
tank20.JPG 1894 hits | 42.89 KB | Posted: 4/12/04 painted and ready for final assembly
tank21.JPG 1957 hits | 34.8 KB | Posted: 4/12/04 Got this fuel hose from www.FuelSafe.com .. connected it to the filler with a hose clamp and to the ...
tank22.JPG 1649 hits | 39.51 KB | Posted: 4/12/04 Bolted the fuel pump cover on. slid on the cover for the fuel hose and its done.
tank23.JPG 2359 hits | 47.62 KB | Posted: 4/12/04 DONE.. Tested and it works.. Fills up easy. Im removing the paint on the hose little by little..