roughypieces.jpg
972 hits | 19.53 KB | Posted: 4/25/04

after the one ton swap, i wasnt getting the rear flex i wanted, so I made these from 1.5x3 angle iro...
roughtogether.jpg
825 hits | 17.44 KB | Posted: 4/25/04

welded on a pice of angle on outside, so it only takes two .5" bolts to mount them together. Drille...
upinthererough.jpg
968 hits | 71.96 KB | Posted: 4/25/04

the top of the angle is close to the uderside of the body, thats why its in two pieces. Has to be b...
passmounted.jpg
911 hits | 47.25 KB | Posted: 4/25/04

one of these pieces welded on either side to mount the bracket. I am still working on my welding a...
passlower.jpg
1012 hits | 69.75 KB | Posted: 4/25/04

these are the front shock mounts from a ttb that were cut and booger welded on (best I could do vert...
mounted:flexed.jpg
972 hits | 71.64 KB | Posted: 4/25/04

this is mounted up in there, painted, and flexed as in the following pics. the stuffed tire is hitt...
passflex.jpg
989 hits | 57.32 KB | Posted: 4/25/04

best flex i could find when i finished the work. All tires are firmly on the ground, but without un...
40stuffed.jpg
931 hits | 58.97 KB | Posted: 4/25/04

the 40 is fully stuffed, and hitting the inside fender well. it clears perfectly around the fender ...
dsideflex.jpg
929 hits | 62.45 KB | Posted: 4/25/04

again, all tires firmly on the ground and no where near lift. the front tire is about 36" off the g...
driverside.jpg
980 hits | 43.44 KB | Posted: 5/13/04

I reworked the front shocks while doing the dual batts and exhaust. the front is no where near comi...
passstuff.jpg
842 hits | 40.15 KB | Posted: 5/13/04

since I put the heims in, I still need to adjust it some, as this tire is hitting a lot on the bumpe...
passstuff2.jpg
816 hits | 33.03 KB | Posted: 5/13/04

same shot, further back
dsidedrop.jpg
853 hits | 57.45 KB | Posted: 5/13/04

thought I would get more flex, but it seems there is another bind instead of the shocks. Its the da...
hangerhits.jpg
932 hits | 50.82 KB | Posted: 5/13/04

Guess Ill have to rework that now.
offtheground.jpg
880 hits | 56.71 KB | Posted: 5/13/04

about 4 inches off the ground, but hard to tell

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog