rivetremoved.JPG 2386 hits | 41.34 KB | Posted: 6/29/03 drivers side front most rivet removed. it was interfering with the bucket being mounted. It was wh...
billnuts.JPG 2756 hits | 62.73 KB | Posted: 6/29/03 here's bill playing with his nuts
newbracket.jpg 4069 hits | 28.21 KB | Posted: 6/29/03 stock radius arm bracket for 79 ford, laid back approx 20 degrees.
newbracket2.jpg 2506 hits | 29.89 KB | Posted: 6/29/03 I also added some more metal on the side of the frame rail to help spread the load since the newer f...
newbracketon.jpg 2427 hits | 42.95 KB | Posted: 6/29/03 temporarily secured. Note how it is notched out for the body mount so I can push the axle forward t...
newbracketon2.jpg 2180 hits | 39.6 KB | Posted: 6/29/03 It should allow for a much better angle on the radius arm. Without the lay back, it would have put ...
front.jpg 2248 hits | 47.44 KB | Posted: 6/29/03 still need steering and track bar
d-bracket.jpg 2126 hits | 36.31 KB | Posted: 6/29/03 drivers side bracket installed with 5, 1/2" bolts
d-radius.jpg 2050 hits | 31.3 KB | Posted: 6/29/03 radius arm angle at ride height with the laid back bracket. It is pretty a good angle
d-radius2.jpg 2217 hits | 45.97 KB | Posted: 6/29/03 another shot of arm
d-tire.jpg 2018 hits | 23.63 KB | Posted: 6/29/03 drivers side tire clearance from fender
d-tire2.jpg 2030 hits | 41.88 KB | Posted: 6/29/03 bumper clearance on drivers side
arbline.jpg 1947 hits | 42.86 KB | Posted: 6/29/03 arb line tied to breather line. They are held out of the way with a soft spring to allow for whee...
arbreg.jpg 1931 hits | 54.34 KB | Posted: 6/29/03 arb regulator tied into the york system
arbregulator.jpg 1879 hits | 45.6 KB | Posted: 6/29/03 just another shot of the regulator with the diff and tranny breathers tied in behind it.
newbrakes.jpg 2047 hits | 49.02 KB | Posted: 6/29/03 bent all new brake lines since I removed the 4wabs computer. Stock ford is metric, so you need to r...
pumpkinlines.jpg 2357 hits | 44.35 KB | Posted: 6/29/03 all the lines to the pumpkin
lowertrac.jpg 4573 hits | 35.51 KB | Posted: 6/29/03 front of lower track bar mount
lowertrac2.jpg 4176 hits | 25.33 KB | Posted: 6/29/03 rear of lower track bar mount. the holes add at least 15 horse power
uppertrac.jpg 4979 hits | 47.41 KB | Posted: 6/29/03 upper track bar mount. Welded to frame and notched for access to the gearbox bolt
testflex3.jpg 3062 hits | 42.39 KB | Posted: 6/29/03 A big thanks to Jack for fab'ing up the mount. there is no bumpsteer.
radiusfix.jpg 2240 hits | 34.21 KB | Posted: 6/29/03 Gusseted the radius arm bracket after it started cracking on the ramsey trail. this should fix any ...