Jer_001.jpg
6156 hits | 104.39 KB | Posted: 10/27/03
Finally got my axle.
It is a Dana 44 Heavy Duty unit.
It is Leaf Sprung.
Keith Lawyer from CO go...
Jer_009.jpg
4776 hits | 118.44 KB | Posted: 10/27/03
All my thanks goes out to Keith_L.
He is the man.
Jer_010.jpg
4571 hits | 88.57 KB | Posted: 10/27/03
The BOM is 610040 which means it came from a 1978 F250 "Part time".
Jer_011.jpg
4068 hits | 86.5 KB | Posted: 10/27/03
Just another shot.
Jer_015.jpg
4514 hits | 82.67 KB | Posted: 10/27/03
F150 donor truck for 5 lug outers, and steering.
Beerman 004.jpg
4106 hits | 82.94 KB | Posted: 12/1/03
This is just a "before" shot
Beerman 005.jpg
4121 hits | 66.6 KB | Posted: 12/1/03
Beerman 006.jpg
4157 hits | 85.36 KB | Posted: 12/1/03
Beerman 007.jpg
4269 hits | 78.13 KB | Posted: 12/1/03
Beerman 008.jpg
4072 hits | 75.42 KB | Posted: 12/1/03
Beerman 009.jpg
3977 hits | 73.44 KB | Posted: 12/1/03
Beerman 010.jpg
3952 hits | 88.17 KB | Posted: 12/1/03
I modified Raf's original design a little and came up with an idea of what i want my Bronco to look ...
Beerman 012.jpg
4388 hits | 83.75 KB | Posted: 12/1/03
This is me grinding the frame after Keith cut off the bumper brackets with the plasma
Beerman 013.jpg
4083 hits | 95.68 KB | Posted: 12/1/03
This is Keith using his favorite toy (Or at least one of them)
Beerman 014.jpg
3864 hits | 88.19 KB | Posted: 12/1/03
Beerman 015.jpg
3791 hits | 71.18 KB | Posted: 12/1/03
Beerman 016.jpg
3655 hits | 47.76 KB | Posted: 12/1/03
Beerman 017.jpg
3838 hits | 76.13 KB | Posted: 12/1/03
We used a high lift jack to support the front of the body while we plasma'ed off the body mounts.
Beerman 018.jpg
3589 hits | 74.59 KB | Posted: 12/1/03
Beerman 019.jpg
3483 hits | 71.73 KB | Posted: 12/1/03
Beerman 020.jpg
3415 hits | 75.21 KB | Posted: 12/1/03
Beerman 021.jpg
3603 hits | 92.88 KB | Posted: 12/1/03
Keith getting ready to take off the sway bar mounts.
Beerman 022.jpg
3383 hits | 95.58 KB | Posted: 12/1/03
Beerman 023.jpg
3278 hits | 95.39 KB | Posted: 12/1/03
Beerman 024.jpg
3220 hits | 95.45 KB | Posted: 12/1/03
Beerman 025.jpg
3214 hits | 87.27 KB | Posted: 12/1/03
Beerman 026.jpg
3192 hits | 89.11 KB | Posted: 12/1/03
Beerman 028.jpg
3048 hits | 59.84 KB | Posted: 12/1/03
Me holding the body mount from the drivers side.
This is the only way to change body bushings, to b...
Beerman 029.jpg
3529 hits | 89.75 KB | Posted: 12/1/03
Beerman 030.jpg
3355 hits | 77.01 KB | Posted: 12/1/03
Beerman 031.jpg
3355 hits | 83.75 KB | Posted: 12/1/03
Beerman 032.jpg
3261 hits | 78.52 KB | Posted: 12/1/03
Beerman 033.jpg
3208 hits | 66.58 KB | Posted: 12/1/03
Me using the Plasma for the first time.
Beerman 034.jpg
3163 hits | 68.36 KB | Posted: 12/1/03
Beerman 035.jpg
3145 hits | 67.54 KB | Posted: 12/1/03
Beerman 036.jpg
3160 hits | 65.93 KB | Posted: 12/1/03
Beerman 037.jpg
3340 hits | 77.41 KB | Posted: 12/1/03
Beerman 038.jpg
3250 hits | 80.39 KB | Posted: 12/1/03
Beerman 039.jpg
3424 hits | 81.09 KB | Posted: 12/1/03
Beerman 040.jpg
3460 hits | 78.45 KB | Posted: 12/1/03
Beerman 041.jpg
3579 hits | 93.09 KB | Posted: 12/1/03
Front most spring hangers.
Keith modified them a bit, and I cleaned them up with the grinder.
Beerman 044.jpg
3428 hits | 67.22 KB | Posted: 12/1/03
Beerman 045.jpg
3263 hits | 66.26 KB | Posted: 12/1/03
Beerman 046.jpg
3302 hits | 83.48 KB | Posted: 12/1/03
The clean weld beads are Keith's. The ugly boogered up weld beads are mine.
This was the first time...
Beerman 047.jpg
3234 hits | 87.86 KB | Posted: 12/1/03
Beerman 048.jpg
3223 hits | 77.58 KB | Posted: 12/1/03
This one I welded up, notice it is pretty ugly.
Good thing Keith had plenty of grinders and grindin...
Beerman 050.jpg
3317 hits | 81.32 KB | Posted: 12/1/03
This is a pic of the first run of the front cross-member.
We had to modify it a bit but at least yo...
Beerman 051.jpg
3104 hits | 71.57 KB | Posted: 12/1/03
Beerman 052.jpg
3146 hits | 78.79 KB | Posted: 12/1/03
Beerman 053.jpg
3222 hits | 82.77 KB | Posted: 12/1/03
Beerman 054.jpg
3828 hits | 90.49 KB | Posted: 12/1/03
Keith test fitting it.
We had the fun of test fitting about 4 times over the weekend. Believe me Ke...
Beerman 055.jpg
3624 hits | 78.01 KB | Posted: 12/1/03
Beerman 056.jpg
3900 hits | 75.61 KB | Posted: 12/1/03
Beerman 057.jpg
3419 hits | 76.57 KB | Posted: 12/1/03
Beerman 058.jpg
3551 hits | 77.71 KB | Posted: 12/1/03
Beerman 059.jpg
3423 hits | 70.08 KB | Posted: 12/1/03
Beerman 060.jpg
3922 hits | 90.59 KB | Posted: 12/1/03
Beerman 061.jpg
3532 hits | 81.8 KB | Posted: 12/1/03
Beerman 062.jpg
4199 hits | 85.39 KB | Posted: 12/1/03
Almost done, just weled the body mount back on.
Beerman 063.jpg
3840 hits | 84.48 KB | Posted: 12/1/03
The other body mount and hanger
Beerman 064.jpg
3563 hits | 58.31 KB | Posted: 12/1/03
Completed front end.
Beerman 065.jpg
3648 hits | 71.12 KB | Posted: 12/1/03
Beerman 066.jpg
3246 hits | 65.44 KB | Posted: 12/1/03
Beerman 067.jpg
3356 hits | 81.33 KB | Posted: 12/1/03
Beerman 068.jpg
3706 hits | 72.12 KB | Posted: 12/1/03
Beerman 069.jpg
3436 hits | 83.37 KB | Posted: 12/1/03
As you have seen Keith's idea was to box in the entire front frame horns with some good ol' steel (3...
Beerman_070.jpg
3346 hits | 89.69 KB | Posted: 12/2/03
We decided to get some ramp poser shots before my SAS is complete.
As you can see this is pathetic....
Beerman_071.jpg
3300 hits | 77.22 KB | Posted: 12/2/03
Beerman_072.jpg
3888 hits | 79.62 KB | Posted: 12/2/03
Beerman_073.jpg
3971 hits | 94.47 KB | Posted: 12/2/03
Beerman_074.jpg
3458 hits | 102.09 KB | Posted: 12/2/03
Beerman_076.jpg
3327 hits | 89.86 KB | Posted: 12/2/03
Beerman_077.jpg
3165 hits | 93.51 KB | Posted: 12/2/03
Beerman_078.jpg
2945 hits | 87.11 KB | Posted: 12/2/03
Beerman_079.jpg
3162 hits | 102.5 KB | Posted: 12/2/03
Beerman_082.jpg
3192 hits | 66.46 KB | Posted: 12/2/03
Notice the 1/2 inch tube.
This is much beefier than the 78-79 Bronco D44's that most of teh members...
Beerman_083.jpg
3091 hits | 62.45 KB | Posted: 12/2/03
Cleaned up axle pics.
Keith plasma'ed off the shock mounts, and the leaf perch.
We then shared the...
Beerman_084.jpg
3194 hits | 89.7 KB | Posted: 12/2/03
Aint she purdy!
Gears 001.jpg
2990 hits | 118.45 KB | Posted: 1/13/04
Left is for D44HD-----Right is for 8.8
D44-Yukon--------8.8-Precision Gear
P0002844.jpg
3002 hits | 77.08 KB | Posted: 3/31/04
Built Axle (Well except calipers and brakes).
P0002845.jpg
3087 hits | 76.72 KB | Posted: 3/31/04
The axle is super clean inside, and all the parts were cleaned up by myself.
Keith welded the u-joi...
P0002846.jpg
3172 hits | 83.66 KB | Posted: 3/31/04
last pic
P0002864.jpg
3131 hits | 75.36 KB | Posted: 4/27/04
No more TTB!
P0002866.jpg
3257 hits | 70.36 KB | Posted: 4/27/04
Floating front half of Bko
P0002888.jpg
3735 hits | 77.01 KB | Posted: 4/27/04
Axle is hung
P0002890.jpg
3340 hits | 79.48 KB | Posted: 4/27/04
First axle flex test.
I was limited due to the rear tire stuffing, and not having enough clearence ...
P0002892.jpg
3164 hits | 64.55 KB | Posted: 4/27/04
Here is a close up of the stuffed tire.
So I am getting ready to install a 2.5" AAL, and possibly t...
P0002895.jpg
4593 hits | 82.46 KB | Posted: 4/27/04
This is a good front pic.
Bumper was given to me by Scott S., He is the man.
Again the front pic...
P0002898.jpg
3700 hits | 74.69 KB | Posted: 4/27/04