dcp_2786.jpg
3084 hits | 78.95 KB | Posted: 2/27/04
Dana 60, complements of a 79 F250.

dcp_2789.jpg
3193 hits | 85.28 KB | Posted: 2/27/04
Painted, re-geared to 5.38s and a Detroit for good measure. Bolted under the Bronco.

dcp_2941.jpg
1714 hits | 94.08 KB | Posted: 2/27/04
Dana 44HD, complements od another 79 F250. It's on the stand, getting 5.38s and a drop in Detroit.

DCP_3249.JPG
1457 hits | 76.12 KB | Posted: 3/11/04
Here's the Dana 44HD cleaned up, w/5.38 gears, a drop-in Detroit and a fresh coat of paint. That's R...

DCP_3337.JPG
1619 hits | 98.31 KB | Posted: 6/14/04
Knuckles with the high steer arms installed.

DCP_3339.JPG
1466 hits | 83.48 KB | Posted: 6/21/04
It's geeting closer. Got the axle joints swapped and the new ball joints...

DCP_3341.JPG
1697 hits | 83.32 KB | Posted: 6/21/04
All the TTB bracketry will be gone tomorrow!

DCP_3344.JPG
1668 hits | 80.54 KB | Posted: 6/21/04
Take a look at those calipers. I can not wait to get this rig back on the trail. Broncofest is this ...

DCP_3347.JPG
1698 hits | 84.64 KB | Posted: 6/23/04
It's under there. Let teh fabrication work begin.

leaf 002.jpg
1112 hits | 107.01 KB | Posted: 9/7/08
Bailed on coils. Got a sweet deal on some F350 Superlift leaf springs. I already like the looks of ...

leaf 003.jpg
1014 hits | 93.97 KB | Posted: 9/7/08
The rear shackle will prove to be interesting on the passenger side. May need to move the catalytic ...

IM000132.jpg
955 hits | 88.57 KB | Posted: 11/19/08
Got a couple of sticks of 2X4 3/16" thick. Cut one just long enough to fit between the framerails. N...

IM000134.jpg
964 hits | 84.07 KB | Posted: 11/19/08
Notched the passenger side to get that side in there.

IM000133.jpg
975 hits | 95.09 KB | Posted: 11/19/08
Here's the spring packs setting against the square tube. Looks pretty good so far.

IM000135.jpg
1127 hits | 93.58 KB | Posted: 11/19/08
The same view from the passenger side. Now I'll get to work on the spring hangers.