New style PS Pump Front.JPG
1530 hits | 121.99 KB | Posted: 10/11/04

Saginaw pump is out of a Chevy 1 ton van and rebuilt by a pro. This pump requires a seperate resivo...
New Style PS Pump Rear.JPG
1327 hits | 114.78 KB | Posted: 10/11/04

Rear view of pump.
Sag bracket out of van front.JPG
1272 hits | 119.38 KB | Posted: 10/11/04

Sag bracket out of van rear.JPG
1170 hits | 112.8 KB | Posted: 10/11/04

Sag bracket out of van with new pump front.JPG
1200 hits | 109.85 KB | Posted: 10/11/04

Sag bracket out of van with new pump side.JPG
1175 hits | 109.28 KB | Posted: 10/11/04

New pump and bracket in truck top front.JPG
1225 hits | 107.52 KB | Posted: 10/11/04

New pump and bracket with AC installed.JPG
1169 hits | 105.44 KB | Posted: 10/11/04

With PS resivoir installed.JPG
1312 hits | 113.36 KB | Posted: 10/11/04

The resivoir is out of a Chevy econo box. Lots of vehicles use a resivoir. If I had it to do over ...
Top view with hoses installed.JPG
1199 hits | 118.09 KB | Posted: 10/11/04

PS cooler installed.JPG
1168 hits | 119.72 KB | Posted: 10/11/04

two pulleys.jpg
1159 hits | 95.47 KB | Posted: 4/27/05

Picture of the two pulleys that you will usually find on a Saginaw pump. The one on the left is fro...
two pulleys big one measured.jpg
1147 hits | 82.62 KB | Posted: 4/27/05

The two pulleys again. The GM pulley measures 6.5" diameter. The center hole is .755".

two pulleys small one measured.jpg
1009 hits | 84.72 KB | Posted: 4/27/05

The pulley on the left is off of an E-350 van Saginaw pump. It is 5.75" in diameter with the .755 d...

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog