Picture 147.jpg 569 hits | 67.08 KB | Posted: 11/6/04 This was the voltage of my Main battery before the install. I dont think my battery is getting full...
Picture 148.jpg 511 hits | 69.23 KB | Posted: 11/6/04 Wow what a big difference. I removed the voltage regulator and all the dual battery stuff. leaving...
Picture 149.jpg 510 hits | 64.84 KB | Posted: 11/6/04 most years should have the same green and red wire. it goes from 12V S to your voltage regulator. ...
Picture 150.jpg 574 hits | 63.08 KB | Posted: 11/6/04 underhood wiring. I cleaned and conduited all the wires. I still need to purchase a 150A fuze and ...
Picture 151.jpg 598 hits | 52.63 KB | Posted: 11/6/04 from the previous picture I found the wires wadded up to install these... so about 10 minutes of dri...
Picture 155.jpg 588 hits | 62.25 KB | Posted: 11/8/04 I bought and soldered a new end on my short battery-solenoid cable since I cut it in half. 44 cents...
Picture 156.jpg 531 hits | 59.66 KB | Posted: 11/8/04 bought this today at the Stereo Shop 25 bucks for the holder and the 150A fuze. Not bad for some b...
Picture 158.jpg 538 hits | 61.74 KB | Posted: 11/8/04 close up of the fuze and holder
Picture 159.jpg 522 hits | 36.8 KB | Posted: 11/11/04 Test fitting and making sure everything lines up.
Picture 160.jpg 561 hits | 57.64 KB | Posted: 11/11/04 view from the bottom. I needed to run a nut and bolt now since the Alts mounting tab is straight th...
Picture 161.jpg 603 hits | 49.91 KB | Posted: 11/11/04 slapping on the pulley... thats not gonna work.
Picture 162.jpg 545 hits | 51.51 KB | Posted: 11/11/04 Going back to the best source for working on my truck... the internet... I bought some machine bush...
Picture 163.jpg 526 hits | 51.52 KB | Posted: 11/11/04 this one fits, its got a little bit of play but it doesnt have to be snug.
Picture 164.jpg 494 hits | 54.19 KB | Posted: 11/11/04 that will do it. Just enough to clear
Picture 165.jpg 552 hits | 56.95 KB | Posted: 11/11/04 handy thought I had to tighten up the pully. The guy at the parts store that removed the serp belt ...
Picture 166.jpg 606 hits | 54.5 KB | Posted: 11/11/04 test fitting this wiring harness I got from a 95 Taurus. I had to put on that terminal lug on the e...
Picture 167.jpg 569 hits | 55.81 KB | Posted: 11/11/04 Pretty much done, just had to put the belt on and cover up that splice job with some electrical tape...
1995 Mustang 3G alt(ebay special)
