D60_Rust_Bucket.JPG
3493 hits | 40.78 KB | Posted: 6/30/03
D60 home from the yard.

D60_Rusted_Junk.JPG
3183 hits | 40.67 KB | Posted: 6/30/03
Ready to be reborn.

D60HP-Hi-Steer.JPG
3474 hits | 43.65 KB | Posted: 6/30/03
Traded out for D50 TTB single wheel hubs (direct fit) was dually. Rebuilt kingpins. Added premium h...

shac.JPG
3840 hits | 43.88 KB | Posted: 6/30/03
These shackles are key to the installation. They are about one inch longer that ORU's design plus t...

Shackle_Hanger_1.JPG
3586 hits | 42.9 KB | Posted: 6/30/03
Used .25" thk square tubing for custom shackle hangers.

Shackle_Hanger_2.JPG
3579 hits | 44.43 KB | Posted: 6/30/03
After trimming looks good. Bushings are tight in there. Some more support braketry will have to be...

Scrap_TTB.JPG
3358 hits | 31.21 KB | Posted: 6/30/03
Pile of scrap.

Ready_for_the_Swap!.JPG
3696 hits | 33.06 KB | Posted: 6/30/03
Getting there! Ready to roll under the big dog!

Project_X_Rr_Hgr_b.JPG
4085 hits | 34.85 KB | Posted: 6/30/03
Bolted on then welded to the frame and the body mount.

x1.JPG
4267 hits | 35.08 KB | Posted: 6/30/03
Im not happy with the shackle angle here. Also the pinion angle is not even close to perfect, it bi...

Project_X_Tow_Strap.JPG
3831 hits | 31.69 KB | Posted: 6/30/03
Uses for a tow strap: #1001 - Preventing vehicle from rolling down angled driveway while SASing.

Project_Xa.JPG
5036 hits | 35.55 KB | Posted: 6/30/03

Project_Xb.JPG
6333 hits | 32.32 KB | Posted: 6/30/03
Perfect rear pinion angle. 6" Skyjacker lift springs with original angle blocks.

Finished-a.JPG
4716 hits | 70.01 KB | Posted: 7/3/03

Finished-b.JPG
3228 hits | 68.76 KB | Posted: 7/3/03
ANY QUESTIONS