DSC00063.jpg
1120 hits | 87.24 KB | Posted: 10/8/03

Engine is out time to get to work
DSC00064.jpg
869 hits | 97.46 KB | Posted: 10/8/03

Roller lifters
DSC00065.jpg
858 hits | 78.1 KB | Posted: 10/8/03

pretty ruff inside
DSC00066.jpg
753 hits | 62.99 KB | Posted: 10/8/03

I will have to notch the pistons here's the tool
DSC00068.jpg
704 hits | 65.91 KB | Posted: 10/8/03

Aluminum cutting Bur will be port matching the intake to new heads
DSC00069.jpg
856 hits | 77.09 KB | Posted: 10/8/03

Electric water pump having trouble fining adapter for lower hose
DSC00070.jpg
2744 hits | 102.48 KB | Posted: 10/8/03

Good picture of the old heads Ah to sell or not to sell. they would be great for when the Bronc goes...
DSC00072.jpg
773 hits | 52.98 KB | Posted: 10/8/03

Look Ma no stud! Hughes Performance Transmissions is putting in bigger studs for my torque monster
DSC00073.jpg
751 hits | 72.99 KB | Posted: 10/8/03

Darn railroad tracks anyway gonna raise the right side of the moter. Won't matter as much on the dra...
DSC00074.jpg
734 hits | 66.09 KB | Posted: 10/8/03

external counter weight going away soon
DSC00075.jpg
788 hits | 50.87 KB | Posted: 10/8/03

Self Explanatory
DSC00076.jpg
779 hits | 73.94 KB | Posted: 10/8/03

Lets see whats in here
DSC00077.jpg
724 hits | 88.68 KB | Posted: 10/8/03

Eagle H beams and ARP bolts
DSC00078.jpg
660 hits | 77.19 KB | Posted: 10/8/03

eagle H beams and ARP bolts
DSC00079.jpg
688 hits | 75.88 KB | Posted: 10/8/03

9 posistion gear
DSC00080.jpg
748 hits | 59.51 KB | Posted: 10/8/03

Victor Jr. with Dominator Flange
DSC00001.jpg
695 hits | 37.07 KB | Posted: 10/9/03

They have to go back in the same hole
DSC00005.jpg
696 hits | 52.53 KB | Posted: 10/9/03

only 4000 miles since new
DSC00007.jpg
733 hits | 78.61 KB | Posted: 10/9/03

wire brush to the rescue
DSC00008.jpg
719 hits | 52.69 KB | Posted: 10/9/03

that's better
DSC00006.jpg
674 hits | 50.01 KB | Posted: 10/9/03

Old Cam
DSC00009.jpg
839 hits | 89.34 KB | Posted: 10/9/03

New pan only has only 4 bolts holding it on starter touchs that weld and less room to tighten torque...
DSC00010.jpg
701 hits | 56.24 KB | Posted: 10/9/03

9 way timing gear
DSC00011.jpg
714 hits | 75 KB | Posted: 10/9/03

degree wheel gonna make a pointer from a coat hanger
DSC00012.jpg
714 hits | 41.27 KB | Posted: 10/9/03

home made piston stop (For finding true top dead center)
DSC00013.jpg
669 hits | 77.54 KB | Posted: 10/10/03

Had to check the clearance between bottom of pan and pickup play putty works great
DSC00016.jpg
731 hits | 36.47 KB | Posted: 10/10/03

This hose adapter is a little small but it will work
DSC00017.jpg
697 hits | 62.35 KB | Posted: 10/10/03

Hughes put bigger studs in for free!
DSC00019.jpg
679 hits | 91.63 KB | Posted: 10/10/03

Sears junk must be made in China, won't work! Maybe on a lawn mower
DSC00020.jpg
659 hits | 88.22 KB | Posted: 10/10/03

Here's what I'm talken about pawn shop special Snap on made in USA in the 60's
DSC00021.jpg
693 hits | 65.83 KB | Posted: 10/10/03

Checking the checking spring I will need .080 intake and .100 exhaust.
DSC00022.jpg
657 hits | 70.77 KB | Posted: 10/10/03

Didn't take long to look like crap only 4000 miles
DSC00023.jpg
637 hits | 76.9 KB | Posted: 10/10/03

This is the poor man's electric water pump it's going back
DSC00024.jpg
647 hits | 84.34 KB | Posted: 10/10/03

Here’s where all my stickers go. Except I'll put the Jon Kaase Racing stickers on the car
DSC00025.jpg
632 hits | 65.42 KB | Posted: 10/10/03

Another day another box. Look! It came with a hat.
DSC00026.jpg
719 hits | 75.4 KB | Posted: 10/10/03

I can't believe the times I was getting with ports that look like this. I can't wait for the new hea...
DSC00027.jpg
661 hits | 81.24 KB | Posted: 10/10/03

I can't believe the times I was getting with ports that look like this. I can't wait for the new hea...
DSC00030.jpg
651 hits | 50.03 KB | Posted: 10/12/03

Finally got the drive shaft pickup working. The magnets were in backwards
DSC00032.jpg
653 hits | 59.71 KB | Posted: 10/12/03

I locked out the centrifugal advance and do it this way
DSC00033.jpg
655 hits | 68.72 KB | Posted: 10/12/03

Here's where I'm storing the Bronco's winch
DSC00036.jpg
655 hits | 64.26 KB | Posted: 10/12/03

these things must be made of gold 40 some a piece
DSC00035.jpg
598 hits | 62.09 KB | Posted: 10/12/03

The flex plate was all ready 29/64's Maybe the converter studs should have been 7/16's
DSC00063.jpg
614 hits | 68.97 KB | Posted: 10/13/03

-10(5/ to bottom of tank -8(1/2) to carb Strange Pro Iron case and large pinion suppport
DSC00064.jpg
610 hits | 61.2 KB | Posted: 10/13/03

billet servo
DSC00065.jpg
678 hits | 45.73 KB | Posted: 10/13/03

Big tranny pan I had to modify the cross member a little
DSC00066.jpg
646 hits | 60.45 KB | Posted: 10/13/03

Strange 35 spline axels with 4.75 bolt pattern (Chevy) with 5/8 studs. I drilled new holes in brake ...
DSC00067.jpg
657 hits | 61.9 KB | Posted: 10/13/03

Vacuum Reservoir long duration cams won't make vacuum at idle. But this is a must for 4 wheeling in ...
DSC00069.jpg
738 hits | 44.13 KB | Posted: 10/13/03

All right lets roll
DSC00071.jpg
796 hits | 62 KB | Posted: 10/13/03

At first you don't see much Difference
DSC00070.jpg
736 hits | 40.47 KB | Posted: 10/13/03

Ok now I see something they are taller
DSC00073.jpg
783 hits | 24.13 KB | Posted: 10/13/03

Hello in there
DSC00074.jpg
715 hits | 25.06 KB | Posted: 10/13/03

DSC00075.jpg
719 hits | 26.69 KB | Posted: 10/13/03

DSC00076.jpg
760 hits | 34.09 KB | Posted: 10/13/03

You have to look close but You can see the intake is farther in (away from cylinder wall
DSC00077.jpg
678 hits | 40.23 KB | Posted: 10/13/03

You have to look close but You can see the intake is farther in (away from cylinder wall
DSC00080.jpg
760 hits | 25.24 KB | Posted: 10/13/03

Double angle
DSC00081.jpg
770 hits | 53.91 KB | Posted: 10/13/03

Take a close look at the intake port where the valve comes though look at the ridge dividing the flo...
DSC00098.jpg
543 hits | 60.24 KB | Posted: 10/18/04

DSC00001_0.jpg
548 hits | 58.91 KB | Posted: 4/13/05

DSC00004.jpg
588 hits | 56.26 KB | Posted: 4/13/05

sound.mpg
1001 hits | 3.56 MB | Posted: 9/3/09


About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog