sag_port.jpg 452 hits | 67.53 KB | Posted: 4/6/05 The port on my Sag pump. 5/8" w/o o-ring. It turns out that almost all of the pumps are 5/8" with ...
van_hose.jpg 444 hits | 39.15 KB | Posted: 4/6/05 The hose I had to buy to get the fitting I needed. One end is 5/8" inverse flare (for the pump), th...
van_hose_end.jpg 438 hits | 41.8 KB | Posted: 4/6/05 The fitting I needed
new_sag_hose.jpg 437 hits | 55.57 KB | Posted: 4/6/05 The new hose. The hydraulic shop crimped it and set up the compression fittings. I tightened every...
sag_filter.jpg 462 hits | 56.02 KB | Posted: 4/7/05 Saginaw pump installed; the orange thing is the power steering filter. This is with one of the earl...
try_3.jpg 437 hits | 47.52 KB | Posted: 4/7/05 Third attempt at sealing the Sag pump. Two copper and one nylon washer on the stock Bronco line (16m...
try_4.jpg 467 hits | 47.27 KB | Posted: 4/7/05 Forth try at sealing the Sag pump. Two nylon washers on the stock Bronco line (16mm Ford type 3 fitt...
Saginaw pump swap
