Picture 115.jpg
4762 hits | 74.85 KB | Posted: 4/2/04
Drilled and tapped right into passenger's frame rail. Note charcoal canister upper left.

Picture 116.jpg
4086 hits | 84.4 KB | Posted: 4/2/04
Lower rad shroud to your upper left for reference

Picture 117.jpg
3634 hits | 58.08 KB | Posted: 4/2/04
Shroud at the bottom, then fan blade, then 1995 mustang 130 amp alternator. Know where you are yet ...

Picture 059.jpg
3499 hits | 65 KB | Posted: 4/3/04
Here's an over head view looking down from above. Just drill and tap the frame rail

Picture 077.jpg
3849 hits | 62.59 KB | Posted: 4/3/04
One large 1 1/2" thick B&M trans cooler. Priced your trans lately ? Get one of these.

IMG_0017.JPG
3545 hits | 22.73 KB | Posted: 9/1/04
This is the first remote filter housing I used and it worked fine. I just wanted one that had a temp...

IMG_0539.JPG
4617 hits | 59.7 KB | Posted: 6/25/04
Summit list this remote filter housing under Perma-Cool number 5021 and at $20 it's a lot cheaper th...

IMG_0541.JPG
3708 hits | 63.49 KB | Posted: 6/25/04
The hose fittings were one buck and the temp sensor comes with the temp gauge. Note the block off bo...

IMG_0553.JPG
3548 hits | 52.12 KB | Posted: 6/25/04
The frame rail is plenty thick enough to drill and tap it. This works better for removal as self ta...

IMG_0558.JPG
4117 hits | 57.53 KB | Posted: 6/25/04
Ready to go on. I used the sensor safe sealant instead of teflon on the threads.

IMG_0562.JPG
3819 hits | 52.2 KB | Posted: 6/25/04
mounted and awaiting the oil filter

IMG_0034.JPG
3762 hits | 59.13 KB | Posted: 6/4/05
Hottest day of the year in bumper to bumper downtown traffic and this is as high as the trans temp w...

IMG_0014.JPG
3517 hits | 34.75 KB | Posted: 6/4/05
Same day (hottest of the year) flyin' down the highway smiling and she's steady at 140 degrees, once...