Picture 045.jpg
1530 hits | 92.48 KB | Posted: 4/3/04
Where we left off, broke with new Y-pipe and 3" cat using stock 2 1/4" muffler and tailpipe

Picture 033.jpg
1516 hits | 75.89 KB | Posted: 4/3/04
less than impressive stock style 2 1/4" tailpipe with plenty of kinks and poor ground clearance

Picture 019.jpg
2123 hits | 44 KB | Posted: 4/3/04
Dynomax 2 1/2" mandrel bent tailpipe. No like Cherokee looking end at all, gotta go !

Picture 022.jpg
2084 hits | 91.1 KB | Posted: 4/3/04
Now we're talking ! 3" straight pipe with 2 1/2" to 3" adaptor welded on. Much better!

Picture 035.jpg
1630 hits | 78.62 KB | Posted: 4/3/04
2 1/2" system vs old, kinked 2 1/4" system. BTW BBQ paint doesn't winter well on exhausts

Picture 009.jpg
1945 hits | 67.16 KB | Posted: 8/24/04
At $41 American, this Walker universal truck muffler was a steal with it's welded construction.

Picture 037.jpg
1329 hits | 72.99 KB | Posted: 8/24/04
It was also a darn sight longer, but no problem when you're using one 3 stage cat(that's only 14" lo...

Picture 036.jpg
1356 hits | 75.77 KB | Posted: 4/3/04
Welded universal truck 2 1/2" muffler vs crimped construction 2 1/4" POS

Picture 039.jpg
1751 hits | 65.42 KB | Posted: 4/3/04
No cat to muffler pipe required, just flanged adaptor. Note stainless bolts, brass nuts

Picture 045.jpg
1359 hits | 67.97 KB | Posted: 4/3/04
Improved ground clearance, sounds much deeper and, at 3", ready to pose with the big trucks

IMG_0076.WAV
2369 hits | 117.6 KB | Posted: 9/10/04
Sound of Walker truck muffler at idle

IMG_0356.JPG
996 hits | 69.14 KB | Posted: 1/16/08
If you don't weld and your part rusts out, you can always slice the pipe with a sawzall and get it o...