IMG_0069.JPG
1679 hits | 65.38 KB | Posted: 5/10/04
Waiting for body panels I figured I'd replace the front brake hoses and the lines between them and t...

IMG_0030.JPG
1496 hits | 56.99 KB | Posted: 5/10/04
Trouble was they were practically giving away rotors at $38.00 CDN ($20 to resurface what would you ...

IMG_0003.JPG
1538 hits | 57.86 KB | Posted: 5/10/04
I couldn't help myself ! New calipers were $25 CDN. Painted them Ford valve cover gray to ward off t...

IMG_0056.JPG
1594 hits | 73.35 KB | Posted: 5/11/04
Highlighted in Ford gray is the hole the brake hose is secured into. After 19 years the hoses and p...

IMG_0075.JPG
1614 hits | 65.37 KB | Posted: 5/11/04
These clips are what hold them in. Don't expect the old ones to be useable(mine were there only in ...

IMG_0063.JPG
1519 hits | 62.2 KB | Posted: 5/11/04
Set in place, just push/tap them home. The six sided frame hole accepts the hose only one way so re...

IMG_0069.JPG
1708 hits | 80.8 KB | Posted: 5/11/04
The line runs from the left brake hose into the union under the master cylinder. It's a two dollar ...

IMG_0125.JPG
1725 hits | 83.66 KB | Posted: 5/13/04
There's the other new brake line running from the right caliper, hugging the TTB and into that union...

IMG_0073.JPG
1716 hits | 68.77 KB | Posted: 5/11/04
There's the new line passing through the frame rail going into the new hose. 20 more years out of h...

IMG_0093.JPG
1536 hits | 37.13 KB | Posted: 5/11/04
This is why I was replacing the hoses. I had to cut them off with a Sawzall as there was nothing lef...

IMG_0090.JPG
1627 hits | 62.41 KB | Posted: 5/11/04
I'd seen a lot of wheel bearing how to's but I'd never seen pics of the rotor seperated from the hub...

IMG_0096.JPG
1709 hits | 52.11 KB | Posted: 5/11/04
I just left the plastic rotor bag on until I get it mounted so I can grease the hub without doing th...

IMG_0111.JPG
1816 hits | 37.78 KB | Posted: 5/11/04
Brushed off 19 years of asbestos to reveal a rusty, but pretty solid dust shield. Leave a rag over t...

IMG_0142.JPG
1487 hits | 46.19 KB | Posted: 5/13/04
Finished ! New rotors, Timkens wheel bearings, pads, calipers, sliders, brake hoses and lines from t...