IMG_0191.JPG
1864 hits | 53.58 KB | Posted: 5/17/04
Scored the door panels today with a pile of other stuff I needed at a wreckers. They're rough, but ...

IMG_0221.JPG
1641 hits | 49.1 KB | Posted: 5/17/04
Bend the staples straight and remove the old inner window wipe seal strip. These are the other two ...

IMG_0207.JPG
1575 hits | 51.38 KB | Posted: 5/17/04
Peel back the insulation away from the glue. Start bending straight all the tabs so you can start r...

IMG_0210.JPG
1519 hits | 44.65 KB | Posted: 5/17/04
There's lots of them and three kinds of clips to remove and try to save for re-installation.

IMG_0213.JPG
1470 hits | 34.35 KB | Posted: 5/17/04
This little pick tool made life a lot easier. Didn't break one clip.

IMG_0215.JPG
1454 hits | 43.85 KB | Posted: 5/17/04
These four screws hold in ....

IMG_0216.JPG
1414 hits | 58.96 KB | Posted: 5/17/04
This dog eared arm rest. Rough enough for you ? Luckily mine are better than these because afterma...

IMG_0217.JPG
1436 hits | 56.68 KB | Posted: 5/17/04
Next off is the velour covered insert, looking pretty dirty too.

IMG_0218.JPG
1587 hits | 47.8 KB | Posted: 5/17/04
Last is the chrome accent rail, a carryover from the 70s. Time to get the chrome polish out.

IMG_0219.JPG
1561 hits | 44.93 KB | Posted: 5/17/04
Oops forgot the door handle hole trim. Now the bare, but filthy door panel is ready for scrubbing i...

IMG_0011.JPG
1619 hits | 40.32 KB | Posted: 5/19/04
Scrubbed down with citrus cleaner, alcohol wiped and in obvious need of vinyl paint

IMG_0018.JPG
1834 hits | 46.51 KB | Posted: 5/19/04
5 very light coats of custom mixed vinyl paint and it's a dead ringer for the rest of the dash and t...

IMG_0029.JPG
1732 hits | 45.15 KB | Posted: 5/19/04
Trial fitting the chrome trim, velour insert and speaker cover, things looked pretty good. Still ha...

IMG_0016.JPG
1907 hits | 46.87 KB | Posted: 12/16/04
Still have to get the lower carpetted covers on but this gives you an idea of how much better they l...