floor 002.jpg
534 hits | 82.07 KB | Posted: 7/3/04
Driver's side
Cut out all the rust, This is not much bigger than the hole was.

floor 003.jpg
502 hits | 66.61 KB | Posted: 7/3/04
Passenger side rust removal.

floor 005.jpg
570 hits | 46.28 KB | Posted: 7/3/04
A paper pattern and the steel I used

floor 006.jpg
550 hits | 61.48 KB | Posted: 7/3/04
Installed

floor 008.jpg
568 hits | 43.43 KB | Posted: 7/3/04
Another piece before I welded it in place. I think I did pretty well working the metal.

floor 009.jpg
504 hits | 67.46 KB | Posted: 7/3/04
Passenger side almost done. Notice the nut I welded on top so that I could hook the ground for the ...

floor 010.jpg
567 hits | 71.89 KB | Posted: 7/3/04
Patch on rocker pannel

floor 012.jpg
536 hits | 54.01 KB | Posted: 7/3/04
Drivers side after patches welded in and covered with fiberglass and resin.

floor 013.jpg
503 hits | 56.59 KB | Posted: 7/3/04
Passenger side after welded patched are covered with fiberglass and resin.