4.jpg
4010 hits | 45.42 KB | Posted: 8/23/03

On the junkyard truck
P0000011.jpg
3231 hits | 103.28 KB | Posted: 8/23/03

Back at home in buddy's truck.
P0000013.jpg
3016 hits | 111.44 KB | Posted: 8/23/03

On the horses
P0000012.jpg
2894 hits | 84.82 KB | Posted: 8/23/03

D44 shafts vs. D60
detroitandcover.jpg
2779 hits | 88.06 KB | Posted: 9/23/03

Detroit No-Spin for 4.88s and new Spicer cover.
stockvdetroit.jpg
2731 hits | 80.93 KB | Posted: 9/23/03

stock carrier with 4.10s v. Detroit
spindles hubs rotors.jpg
2661 hits | 81.29 KB | Posted: 9/25/03

cleaned up and painted hubs and spindles.
stuff.jpg
2554 hits | 64.92 KB | Posted: 9/25/03

stuff. The blue shafts on teh right are for the D60.
ttbvsd60 length.jpg
2624 hits | 83.73 KB | Posted: 9/25/03

D60 v. TTB passenger shafts
powdercoated.jpg
2727 hits | 81.99 KB | Posted: 10/17/03

Powdercoated.
ttb gone2.jpg
2720 hits | 85.16 KB | Posted: 8/23/03

TTB removed
coil tower1.jpg
2813 hits | 70.19 KB | Posted: 8/23/03

removed coil tower
axle under truck.jpg
2934 hits | 88.61 KB | Posted: 10/18/03

axle mocked up under truck.
mocked up hangar.jpg
3400 hits | 79.78 KB | Posted: 10/29/03

bent frame.jpg
3140 hits | 87.94 KB | Posted: 10/29/03

boogered frame
boxframe2.jpg
3102 hits | 88.26 KB | Posted: 11/11/03

begining to box frame for hangars
boxframe4.jpg
3269 hits | 81.67 KB | Posted: 11/11/03

boxframe6.jpg
3066 hits | 83.33 KB | Posted: 11/11/03

passenger side complete for now
boxframe7.jpg
3103 hits | 100.93 KB | Posted: 11/11/03

grinding down welds slightly
boxframe10.jpg
3080 hits | 91.16 KB | Posted: 11/11/03

There will be a 2x3 crossmember running between the frame and connecting the hangars.
driversboxed.jpg
3289 hits | 87.04 KB | Posted: 11/11/03

driver's side boxed in.
passboxed.jpg
3105 hits | 94.83 KB | Posted: 11/11/03

passenger side boxed in.
xmember.jpg
3183 hits | 97.26 KB | Posted: 11/13/03

2x4x3/16 inch used for front x-member.
xmember2.jpg
3188 hits | 74.41 KB | Posted: 11/13/03

xmember3.jpg
3327 hits | 98.27 KB | Posted: 11/13/03

engine xmember aftercut.jpg
3318 hits | 86.65 KB | Posted: 11/13/03

still needs to be cleaned up with the grinder.
painted.jpg
3441 hits | 93.22 KB | Posted: 11/15/03

Painted
drivershanger.jpg
4543 hits | 75.6 KB | Posted: 11/15/03

from the back side, the drivers hanger
passhangar.jpg
4387 hits | 72.34 KB | Posted: 11/15/03

pass. side hanger
leafs.jpg
3511 hits | 91.9 KB | Posted: 11/18/03

shackle angle.jpg
4798 hits | 83.73 KB | Posted: 11/19/03

This is just mocked up, unweighted. Not good shackle angle.
drivers hangar mod.jpg
3435 hits | 56.17 KB | Posted: 12/3/03

This is how I modified the rearward hangar.
hangar compare.jpg
3544 hits | 56.51 KB | Posted: 12/3/03

Hangar comparison
shackle angle 2.jpg
4414 hits | 54.79 KB | Posted: 12/3/03

Current shackle angle, before cutting
modified body mount.jpg
4560 hits | 62.27 KB | Posted: 12/3/03

Modified body mount.
drivers side.jpg
4863 hits | 52.69 KB | Posted: 12/10/03

drivers side mounted with 5/8" u-bolts.
pass. hangar complete.jpg
4396 hits | 59.04 KB | Posted: 12/10/03

pass. side hangar complete.
35s1.jpg
4625 hits | 55.48 KB | Posted: 12/15/03

35" on a 16.5 centered about 1.5" further than stock. I am jsut using these tires to get everythin...
35s2.jpg
3452 hits | 56.04 KB | Posted: 12/15/03

35s3.jpg
3267 hits | 56.92 KB | Posted: 12/15/03

It sits up pretty tall. I am planning on 37"s
38s2.jpg
3330 hits | 54.66 KB | Posted: 12/18/03

looks good with 38s

crap tires.jpg
3349 hits | 57.73 KB | Posted: 12/18/03

on some crappy tires
driveway2.jpg
3003 hits | 54.57 KB | Posted: 12/18/03

3 SAS'd Broncs.
new shackle angle.jpg
3287 hits | 85.98 KB | Posted: 3/29/04

raised up shackle into hangar about 1.5"
new shackle angle 2.jpg
4090 hits | 79.17 KB | Posted: 3/29/04

Better. Still about 5.5" higher where spring bolts in the front, but I am happy with this. We shal...
complete4.jpg
3343 hits | 91.47 KB | Posted: 4/3/04

Final setup
warn hubs 2.jpg
2891 hits | 80.37 KB | Posted: 4/27/04

warn hubs.jpg
3268 hits | 71.68 KB | Posted: 4/27/04


About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog