1988 Ford Bronco
| Owner: |
Mike Gerlach |
| From: |
Friendswood, TX, U.S.A. (Other registries in TX) |
| Year, Make, & Model: |
1988 Ford Bronco (Other Ford Broncos) |
| Avatar: |
 |
| Clubs: |
SuperFord.org (Other vehicles in this club)
BigBroncos.com Registry (Other vehicles in this club)
2 Big Broncos Southern (Other vehicles in this club)
FullSizeBronco.com (Other vehicles in this club)
|
| Nickname: |
Minister |
| Mileage: |
170 |
| Engine: |
V-8 302 EFI, K&N, and factory everything else. |
| Drivetrain: |
AOD, Warn Premium manual hubs, 4.10 gears front and rear, limited slip rear, removed front & rear sway bars, 35x12.5 Goodyear MT/Rs, rear disc brake conversion. |
| Notes: |
6" Superlift installed by ME!, dual front shocks, extended brake lines and diff. vents, Westin side bars, Smittybuilt roll bar, Grill Guard w/ off-road lights, Sprayed in bedliner complete inside and also rocker panels outside including side bars, Softtops fastback convertible top, hidden strobes for volunteer EMS. |
| Last Updated: |
3/5/2004 |
| Hits: |
16253 |
IMG_2333.JPG
2198 hits | 56.59 KB | Posted: 3/5/04
Shows brake hose adapter.
IMG_2334.JPG
2306 hits | 59.91 KB | Posted: 3/5/04
Finished product. Easy and they work well. Purchased kit from Jeff's Graveyard. Total coast for everything approx $500. Took one afternoon to complete.
IMG_2332.JPG
2270 hits | 52.4 KB | Posted: 3/5/04
Fit check with the axles and discs. Good fit - no mod required
IMG_2330.JPG
2112 hits | 54.16 KB | Posted: 3/5/04
figured out the caliper brackets. 2 pieces per side with a choice of mounting to the front or rear of the axle. I picked the rear.
IMG_2328.JPG
2339 hits | 56.59 KB | Posted: 3/5/04
Bolted on calipers and installed brake hose adapter.
IMG_2326.JPG
2128 hits | 59.18 KB | Posted: 3/5/04
fit check the disc to the axle and axle housing. Good fit - no modification required.
IMG_2324.JPG
2296 hits | 63.02 KB | Posted: 3/5/04
Remove the park brake cable from the backing plate
IMG_2322.JPG
2172 hits | 70.95 KB | Posted: 3/5/04
Pull the C-clips to remove axles
IMG_2321.JPG
2021 hits | 63.73 KB | Posted: 3/5/04
Remove the old drum and backing plate
IMG_2328.JPG
2339 hits | 56.59 KB | Posted: 3/5/04
Bolted on calipers and installed brake hose adapter.
IMG_2334.JPG
2306 hits | 59.91 KB | Posted: 3/5/04
Finished product. Easy and they work well. Purchased kit from Jeff's Graveyard. Total coast for everything approx $500. Took one afternoon to complete.
IMG_2324.JPG
2296 hits | 63.02 KB | Posted: 3/5/04
Remove the park brake cable from the backing plate
IMG_2332.JPG
2270 hits | 52.4 KB | Posted: 3/5/04
Fit check with the axles and discs. Good fit - no mod required
IMG_2333.JPG
2198 hits | 56.59 KB | Posted: 3/5/04
Shows brake hose adapter.
IMG_2322.JPG
2172 hits | 70.95 KB | Posted: 3/5/04
Pull the C-clips to remove axles
4 broncos at shilo.jpg
2143 hits | 61.72 KB | Posted: 3/5/04
Shilo
IMG_2326.JPG
2128 hits | 59.18 KB | Posted: 3/5/04
fit check the disc to the axle and axle housing. Good fit - no modification required.
IMG_2330.JPG
2112 hits | 54.16 KB | Posted: 3/5/04
figured out the caliper brackets. 2 pieces per side with a choice of mounting to the front or rear of the axle. I picked the rear.
Maintenance & Modification Logs
This user hasn't added any log entries, yet.
